제품명	분자식	Cas No.	원산지
DY-2 (Barium sulfate)		7727-43-7	중국
Allyl alcohol		107-18-6	중국
Benzyl alcohol		100-51-6	중국
Ethyl alcohol		64-17-5	남아공
Iso-Propylol (이소프로판올-에탄올 혼합물)		67-63-0 67-17-5	남아공
Fluorene-9-bisphenol (BPF)		3236-71-3	중국
Glycerine		56-81-5	말레이시아
O-Phenylphenol		90-43-7	중국
4,4'-Thiodiphenol		2664-63-3	중국
Tris(2-hydroxyethyl) Isocyanurate (THEIC)		839-90-7	중국
Cresyl Diphenyl Phosphate (CDP)		26444-49-5	중국

  포장단위25kg paper bag

  용도페인트, 분체도료

•   특징
• 입자가 균일하고 반응성이 없으며 광택성이 뛰어나 분체도료의 체질 안정성 안료로 사용됨

Test items	Specification
Apperance	White powder
Whiteness (%)	95.0 Min.
pH (20℃)	7.0 ~10.0
Oil absorption (%)	10.0 ~ 16.0
Moisture (%)	0.15 Max.
HCl insoluble matter (%)	98.0 Min.
Sieve residue #325 (%)	0.01 Max.
Density	4.3 ~ 4.4
입도분석	10.0 μm Max.

Test items	Specification
Apperance	Colorless transparent liquid
Purity (%)	99.0 Min.
Water content (%)	0.20 Max.

Test items	Specification
Apperance	Clear colorless liquid
Purity (%)	99.9 Min.
Color (APHA)	10 Max.
Relative density (g/cm3, 20℃)	1.043 ~1.048
Refractive index	1.538 ~ 1.541
Water content (%)	0.1 Max
Acidity	1.0 Max.
Benzaldehyde	300ppm Max.
Chloride (%)	0.005 Max.
Peroxide value	5 Max.
Clarity of solution (1:30)	Clear

Test items	Specification
Apperance	Clear and free from suspended matter
Ethanol(dry basis) % Vol	99.99 Min.
Methanol	20 ppm Max.
Color (APHA)	2.5 Max.
Specific gravity (20℃)	0.791 ± 0.001
Water content (%)	0.15 Max.
Acidity (as CH3COOH)	30 ppm Max.
Carbonyls (as acetaldehydes)	20 ppm Max.
Denatonium benzoate (ppm)	8 ~12
Esters (as ethyl acetate)	50 ppm Max.
Higher alcohols (as iso-butanol)	10 ppm Max.

Test items	Specification
Apperance	Clear and free from suspended matter
Color (APHA)	10 Max.
Density (g/ml, 20℃)	0.785 ~ 0.787
Refractive index	1.538 ~ 1.541
Water content (%)	0.1 Max.
Ethanol % mass	15.0 Max.
Iso-Propanol % mass	85.0 Min.
N-Propanol (%)	2.0 Max.

Test items	Specification
Apperance	White crystalline powder
Purity (%)	99.0 Min.
Melting point (℃)	222.0 ~ 226.5

Test items	Specification
Purity (%)	99.5 Min.
Specific gravity (25℃)	1.2606 Min.
Color (APHA)	5 Max.
Residue on ignition (%)	0.01 Max.
Chlorides	10 ppm Max.
Sulphates	20 ppm Max.
Arsenic	1.5 ppm Max.
Heavy metals as Pb	5 ppm Max.
Chlorinated compounds as Chlorine	30 ppm Max.
Fatty acids & esters (0.5N NaOH)	0.3 ml Max.
Diethylene glycol (%)	0.1 Max.

Test items	Specification
Appearance	White flake
Purity (%)	99.5 Min.
Melting point (℃)	55.0 ~ 57.5
55.0 ~ 57.5	0.1 Max.
pH value	6.0 ~7.0
Density (g/ml)	1.25 ± 0.01
Sulphur salts	150 ppm Max.
Chlorides	30 ppm Max.
Heavy metals	20 ppm Max.

Test items	Specification
Appearance	White sheet crystal
Color (APHA)	100 Max.
Purity (%)	98.0 Min.
Melting point (℃)	150.0 Min
Loss on drying (110℃ for 4hrs)	0.5% Max.
Impurity (w/w %) (Dithiophenol and trithiophenol)	1.0 Max.

Test items	Specification
Appearance	White crystalline powder
Melting point (℃)	133.5 ~ 137.0
Hydroxyl value	640 ± 10
Acidity	1.0 Max.
pH value (10% water solution)	6.5 ~ 7.5
Turbidity (10% water solution)	1.0 Max.

Test items	Specification
Color (APHA)	W50 Max.
Specific gravity (20℃)	1.205 Min.
Refractive index (20℃)	1.55 ~ 1.57
Water content	0.1% Max.
Acid value	0.1 Max.